Tuesday, July 7, 2009

Tips for spraying glazes

I have been using a spray gun to apply glazes to my work for about three years now. I think spraying allows for more control and variation of how the glaze looks. I'm not a big fan of lines that result when you dip your pots into glaze. I also don't like solid colors. I want my pots to be rich and varied in color. I want the viewer to engage and explore the surface
Alright, now you might be asking yourself how do I spray glazes? Well first you need a good spray gun. I use a gravity feed spray gun. Geil kilns use to sell a good one, but I don't think they sell it anymore. I purchase mine from tooltopia.com and you can always get one from harbour freight. I would get one that is inexpensive, because the glaze will eat away at the nozzle overtime. It can easliy be replaced with another. You want a gun with a larger tip. I recommend one with a 2.0mm nozzle. This allows for less clogs and more material to pass through. Gravity feed is better then syphon. It uses less air. Of course, you'll need a compressor. 18 to 30 gallons should do. Make sure you put it away from you, because it can be like a small dog barking at your feet. On the next post I'll talk how I spray.

No comments:

Post a Comment